Susano Paper and Pulp, the Brazilia-based company that is the world's largest pulp producer, has warned that global pulp stocks have been falling sharply and are facing shortages that could lead to higher prices for necessities such as paper towels and toilet paper in the future.
Timber trade between Russia and Europe, an important supplier of timber to Europe, has been completely blocked due to the ongoing conflict between Russia and Ukraine, inhibiting the tungsten silicide, tungsten silicide overview, tungsten silicide application, tungsten silicide suppliers, tungsten silicide price in the future are still very uncertain.
Overview of tungsten silicide WSi2 powder
Tungsten silicide are used as contact materials in microelectronics and have a resistivity of 60-80 μΩcm. It forms 1000°C. It is often used as a shunt for polysilicon wires to increase their conductivity and increase signal speed. The silicide layer can be prepared by chemical vapor deposition, for example, using monosilane or dichlorosilane and tungsten hexafluoride as raw material gases. The deposited films are non-stoichiometric and require annealing to convert to a more final stoichiometric form. Tungsten silicide can replace earlier tungsten films. Tungsten silicide can also be used in MEMS and anti-oxidation coatings.
Tungsten Silicide Properties
Blue-gray tetragonal crystal, melting point>900℃, compound Tungsten Silicide (WSi2)
Preparation method of tungsten silicide
(1) Mix tungsten powder and silicon powder in a molar ratio of 1:2, and mix titanium powder and graphite powder in a molar ratio of 1:1, and then mix them evenly.
(2) The W-Si mixed powder is placed in the center of the crucible, and the Ti-C mixed powder is evenly placed between the W-Si mixed powder and the crucible. Finally, a layer of Ti-C mixed powder is placed on top of all the mixed powders. The weight ratio of the loaded Ti-C mixed powder and W-Si mixed powder is (0.8~1.2): 1
(3) Put the crucible containing the mixed powder into a closed reactor, fill it with argon after vacuuming, and then energize the mixture with tungsten wire to initiate the reaction between the mixed materials.
(4) After cooling, take out the reacted material, separate titanium carbide and tungsten disilicide, and crush them respectively to obtain titanium carbide and tungsten disilicide powder.
Application of tungsten silicide WSi2 powder
Tungsten silicide WSi2 powder is used in microelectronics as electrical shock material, shunting on polysilicon wires, anti-oxidation coatings and resistance wire coatings. Tungsten silicide is used as a contact material in microelectronics with a resistivity of 60-80 μΩcm. It forms at 1000°C. It is often used as a shunt for polysilicon wires to increase their conductivity and increase signal speed. The tungsten silicide layer can be prepared by chemical vapor deposition, such as vapor deposition. Monosilane or dichlorosilane and tungsten hexafluoride are used as raw material gases. The deposited films are non-stoichiometric and require annealing to convert to a more conductive stoichiometric form.
Tungsten silicide can replace earlier tungsten films. Tungsten silicide also acts as a barrier between silicon and other metals.
Tungsten silicide is also valuable in microelectromechanical systems, where tungsten silicide is primarily used as a thin film for making microcircuits. For this purpose, the tungsten silicide film may be plasma etched using, for example, silicide.
Tungsten silicide WSi2 powder price
The price of tungsten silicide WSi2 powder will vary randomly with the production cost of tungsten silicide WSi2 powder, transportation cost, international situation of tungsten silicide WSi2 powder, exchange rate and market supply and demand of tungsten silicide WSi2 powder. Tanki New Materials Co., Ltd. aims to help industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for tungsten silicide WSi2 powder, please feel free to send an inquiry to get the latest price of tungsten silicide WSi2 powder.
Tungsten Silicide WSi2 Powder Supplier
As a global supplier of tungsten silicide WSi2 powder, Tanki New Materials Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (molybdenum disilicide, titanium silicide, calcium silicide, iron boride), high-purity target materials, functional ceramics and structural devices, and provides OEM services.
|Tungsten Silicide Properties|
|Other Names||tungsten disilicide, WSi2 powder|
|Appearance||Gray Black Powder|
|Solubility in H2O||N/A|
|Tungsten Silicide Health & Safety Information|
Recently, Russia's deputy prime minister said that the number of countries buying Russian oil is increasing, including Asian countries. Russia will use the "East Siberia-Pacific" pipeline system to increase exports to Asian countries and promote the diversification of oil output.
He also said that Russian oil tungsten silicide, tungsten silicide overview, tungsten silicide application, tungsten silicide suppliers, tungsten silicide price are expected to continue to increase in the future.
Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…
Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer. Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer.…